Synchronizing Wireless 7-In-1 Sensor; Data Clearing; Display Console Functions And Operation; Screen Display - Bresser 7003800 Instruction Manual

Note
:
If no display appears when power up the console, you can press [ RESET ] by using a pointed
object. If this process still not work, you can remove the backup battery and unplug the adaptor
then re-power up the console again.

3.6 Synchronizing wireless 7-in-1 sensor

Immediately after power up the console, while still in synchronization mode, the 7-in-1 sensor
can be paired to the console automatically (as indicated by the flashing antenna ). User may
also manually restart the synchronization mode by pressing the [ SENSOR / WI-FI ]. Once they
are paired up, the sensor signal strength indicator and weather reading will appear on your
console display.

3.7 Data clearing

During installation of the wireless 7-in-1 sensor, the sensors were likely to be triggered, resulting
in erroneous rainfall and wind measurements. After the installation, user may clear out all the
erroneous data from the display console. Simply press the [ RESET ] once to re-start the console.
4.

Display console functions and operation

4.1 Screen display

1. Outdoor temperature & humidity
2. Weather index and optional air quality
sensor(s) readings (e.g.PM2.5 /10, CO
HCHO + VOC, CO)
3. UV index & light intensity (SUN)
4. Time calendar, moon phase & sunrise/
Sunset
5. Wind speed
6. Wind direction, Beaufort & Gust
,
7. Weather forecast
2
8. Indoor / CH temperature & humidity
9. Barometer
10. Rainfall & Rain rate
11. Weather history graph
18
5
1
6
2
3 7 10
4 11
8
9