Operating From The Landing Station Controls - Savaria M2Lift Owner's Manual

Operating from the Landing Station Controls

Figure 3 shows the landing station (hall call).
Figure 3
Landing
buttons
Key switch
To operate the lift from the landing (call/send) station controls:
1 Insert the key into the key switch and turn it to the ON position to activate
the operating buttons.
2 Press the appropriate landing button to move the platform to the desired
landing. Note that the lift will not move if the gate is open.
3 When the lift reaches the landing, the door will unlock automatically. If you
need to re-open the door after the delay, turn the key on and press the call
Up button again to unlock the door.
4 To prevent unauthorized use of the lift, take the key out when the unit is not
in operation.
Part No. 001103, 30-m01-2024
Surface Mount
M2LIFT Owner's Manual
11