Operation; Before Operating The Stairlift; Operating The Stairlift - Savaria K2 Owner's Manual

10

4. OPERATION

Before Operating the Stairlift

1 Ensure the stairway is clear of any obstructions and the stairlift charger is
plugged in at the wall.
2 Insert the key and turn it a quarter turn clockwise. Flip the ON/OFF power
switch (located on the top of the carriage) to the ON position.
3 Check that the seat is locked in the riding position for up/down travel.
If the chair has not been used for over an hour, press the remote
button twice to wake it from sleep mode. If the chair has not been
used for over 24 hours, run the chair from the arm toggle switch
for a second to wake it from sleep mode. You can then use the
remotes for normal operation.

Operating the Stairlift

1 If necessary, use the remote control to call the stairlift to the required end of
the rail for boarding. Be sure to point the remote at the lift when pressing
the button.
2 If you have the optional manual folding rail, manually fold down the rail at
the bottom of the stairs.
If you have the optional power folding rail, your remote will have two
power-fold buttons on it. Press the "fold down" button on the remote
control unit to fold down the rail at the bottom of the stairs.
3 If necessary, fold down the seat, armrests, and footrest. Note that if you have
the optional powered footrest, raising/lowering the arm that has the toggle
switch on it will raise/lower the footrest.
4 If you have a manual swivel seat, lift up the seat swivel handle, rotate the
seat to a comfortable boarding position, and then release the swivel handle
to lock the seat in place.
If you have the optional powered swivel seat, use the up/down arrow
buttons on the remote to swivel the seat to a comfortable boarding
position. Note that you can also use the toggle switch on the arm to swivel
the seat. Ensure the seat is locked in place before boarding.
5 Position yourself in the seat and fasten the seat belt.
K2 Stairlift Owner's Manual
NOTE
Part No. 001022, 08-m05-2020