Operating From The Landing Station Controls - Savaria V1504 Owner's Manual

10

Operating from the Landing Station Controls

Figure 3 shows the different types of landing stations (hall calls).
Figure 3
Flush Mount
To operate the V1504 from the landing (call/send) station controls:
1 Insert the key into the key switch (if equipped) and turn it to the ON position
to activate the operating buttons.
2 Press the appropriate button to move the lift in the required direction. Note
that the V1504 will not move if one of the doors is open.
3 When the lift reaches the landing, the door will unlock automatically (for
units with mechanical GAL locks). For units with an interlock (WR500 or
Prolock), the door will unlock automatically for a few seconds when the lift
reaches the landing. If you need to re-open the door after the delay, turn the
key to the ON position and press the call button again to unlock the door.
4 To prevent unauthorized use of the lift, take the key out when the unit is not
in operation.
V1504 Owner's Manual
Landing
buttons
Key switch
Surface Mount
Part No. 000692, 02-m01-2024
In Frame