Setting Target Values - Taurus IC70 Smart Assembly And Operating Instructions Manual

3.6.2

Setting Target Values

You can set target values for time, distance, calories and/or pulse.

NOTICE
Please note that a compatible chest strap is needed for displaying and setting a value for pulse.
You can enter the settings in the following order: TIME (training time) - DIST (distance) - KCAL
(calories) - BPM (pulse).
1. To start up the console, press any button or pedal briefl y.
2. To set target values for TIME, DIST, KCAL and/or BPM, press MODE.
The console switches to training time and "TIME" blinks.
3. To skip the setting for TIME, press MODE again.
4. To select and enter a value for TIME, press SET.
5. To set the desired training time, press SET (press and hold for fast increase) until the desired
value is reached.
6. To confi rm the setting and continue with the next parameter, press MODE.
The console switches to distance and "DIST" blinks.
7. To skip the setting for DIST, press MODE again.
8. To select and enter a value for DIST, press SET.
9. To set the desired distance, press SET (press and hold for fast increase) until the desired value is
reached.
10. To confi rm the setting and continue with the next parameter, press MODE.
The console switches to calories and "KCAL" blinks.
11. To skip the setting for KCAL, press MODE again.
12. To select and enter a value for KCAL, press SET.
13. To set the desired calorie value, press SET (press and hold for fast increase) until the desired value
is reached.
14. To confi rm the setting and continue with the next parameter, press MODE.
The console switches to pulse and "BPM" blinks.
⚠ WARNING
Your training equipment is not a medical device. The heart rate measurement of this equipment
may be inaccurate. Various factors can aff ect the accuracy of the heart rate measurement. The
heart rate measurement serves only as a training aid. Over-exercise may result in serious injury
or death. If you feel faint, stop exercising immediately.
15. To skip the setting for BPM and start the training, press MODE again.
16. To select and enter a value for BPM, press SET.
17. To set the desired pulse, press SET (press and hold for fast increase) until the desired value is
reached.
26
IC70 Smart