Monitor-To-Monitor Data Copy - Copy Menu; Overview; Structure Of The Copy Menu E; Setting Lists Of The Copy Menu - Sony HD Trinitron HDM-20E1J Operation Manual

Monitor-to-Monitor Data Copy — COPY Menu

Overview

When multiple monitors are connected via their serial
remote ports, data can be shared between the monitors
by data copy. The data copy from one monitor to
another is accomplished with the COPY menu.
Structure of the COPY Menu
Main Menu Level 1
COPY E
MONITOR ADDRESS [E1]

Setting Lists of the COPY Menu

This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see "About
menu numbers" on page 15 (E).
• The arrow mark (÷) refers you to another setting
list that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not
have any sub-list.
E COPY menu
Select COPY from the menu list.
CONTROL PRESET ADJ
COLOR TEMP ADJ
SET UP
MEMORY CARD
COPY ÷[E1]
STATUS
MAINTENANCE
KEY PROTECT OFF
E
Level 2
ALL [E11]
CONTROL PRESET [E11]
COLOR TEMP [E11]
SET UP [E11]
[E1] MONITOR ADDRESS menu
Select the copy source monitor.
MONITOR ADDRESS: Enter the address number.
÷[E11]
[E11] COPY menu
Select the data to be copied. ÷ Copy is carried out.
ALL: Copy data for all menu settings.
CONTROL PRESET: Copy the data for the
CONTROL PRESET ADJ menu settings.
COLOR TEMP: Copy the data for the COLOR
TEMP ADJ menu settings.
SET UP: Copy the data for the SET UP menu settings.
43 (E)