Displaying Information About The Monitor - Status Menu; Overview; Structure Of The Status Menu F; Setting Lists Of The Status Menu - Sony HD Trinitron HDM-20E1J Operation Manual

Displaying Information About the Monitor
— STATUS Menu

Overview

The STATUS menu is used to view general data about
the monitor and information about signals assigned to
the slots in the rear panel.
Structure of the STATUS Menu [F]
Main Menu
STATUS F
STATUS (1/3) [F1]
STATUS (2/3) [F2]
STATUS (3/3) [F3]

Setting Lists of the STATUS Menu

This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see "About
menu numbers" on page 15 (E).
• The arrow mark (÷) refers you to another setting
list that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not
have any sub-list.
F STATUS menu
Select STATUS from the menu list.
CONTROL PRESET ADJ
COLOR TEMP ADJ
SET UP
MEMORY CARD
COPY
STATUS ÷[F1]
MAINTENANCE
KEY PROTECT OFF
[F1] STATUS menu (1/3)
Specify the channel block to be detected from channel
1 to channel 99.
[F11]
CH STATUS menu
Data about the current channel is displayed.
CH: channel number
SL: slot number
44 (E)
Level 1
CH STATUS [F11]
SLOT STATUS [F31]
Level 2
IN: input connector number
FORMAT: format of the input signal
NAME: channel name
[F2] STATUS menu (2/3)
Data about the monitor is displayed.
MODEL NAME: model name
SERIAL NO: serial number
OPERATION TIME: operation time (in hours)
SOFTWARE VERSION: software version
[F3] STATUS menu (3/3)
Data about circuit boards installed into the respective
slots in the rear panel is displayed.
When the BKM-41HD or BKM-42HD is installed in
SLOT 2 and SLOT 3, the following is displayed.
When any circuit boards are not installed, EMPTY is
displayed for SLOT 2 to SLOT 5.
SLOT1: CONTROL
SLOT2: HD SDI
SLOT3: EMPTY
SLOT4: EMPTY
SLOT5: EMPTY
SLOT6: VIDEO AMP
SLOT7: DEFLECTION
SLOT8: EMPTY
SLOT9: POWER SUPPLY
[F31] SLOT STATUS menu
Select the desired slot. Data about the circuit board
installed in the selected slot.
MODEL NAME: Model name of that circuit board
SERIAL NO: Serial number of that circuit board