Sony HD Trinitron HDM-20E1J Operation Manual page 86

Setting the Input Configuration (SET UP 1) — INPUT CONFIGURATION Menu
[C12] SCREEN MODE menu (xxCH)
Select the scan size.
16:9-NORM: Overscanned 16:9 aspect ratio.
16:9-UNDR: Underscanned 16:9 aspect ratio.
4:3-IN 16:9N: Overscanned 4:3 aspect ratio. (when
using 16:9 mask)
4:3-IN 16:9U: Underscanned 4:3 aspect ratio. (when
using 16:9 mask)
4:3-NORM: Overscanned 4:3 aspect ratio. (when not
using 16:9 mask)
4:3-UNDR: Underscanned 4:3 aspect ratio. (when not
using 16:9 mask)
Note
When the signal of 1125 scanning lines is input, only
16:9-NORM and 16:9-UNDR are available.
[C13] SAFE AREA MODE
Select the setting for each items of SAFE AREA
setting list.
SAD MODE: Select the safe area mode.
16:9-80: Displays a 80% safe area in 16:9 screen.
16:9-88: Displays a 88% safe area in 16:9 screen.
16:9-90: Displays a 90% safe area in 16:9 screen.
16:9-93: Displays a 93% safe area in 16:9 screen.
4:3-80: Displays a 80% safe area in 4:3 screen.
4:3-88: Displays a 88% safe area in 4:3 screen.
4:3-90: Displays a 90% safe area in 4:3 screen.
OFF: Safe area is not displayed in 16:9 screen.
SAD H POSITION: Adjust the horizontal display
position of safe area (–32 to +32).
4:3 AREA MARKER: Select whether the 4:3 line is
displayed in16:9 screen or not (ON or OFF).
4:3 BLK: Select the blanking outside the 4:3 area.
HALF: Select the half blanking
BLACK: Blanks outside the 4:3 area.
OFF: Do not blank.
Notes
• It is not allowed to set all of three SAFE AREA, 4:3
AREA MAKER and 4:3 BLK to OFF simultanously.
• When you change the input channel with the SAFE
ARE MODE menu displayed, the input channel may
not be changed correctly. If it happens, try to change
the input channel again.
30 (E)
[C14] CHANNEL NAME menu (xxCH)
Give the channel a name. Select a preset name, or enter
a new one.
PROG: Program signal.
EDIT: Signal from an editor.
CAM: Camera signal.
VTR: Signal from a VTR.
NEW NAME: Enter a new name. (Up to 20 characters
can be entered and up to six characters from the
head of the name are displayed in the INPUT
CONFIGURATION menu .
[C15] COPY menu (xxCH)
Select the source to be copied from.
OTHER CH: Copy data from another channel. Enter
the channel number.
When the input channel number is deleted with the
Del button. the number "1" appears instead.
Restore the previous setting by pressing the
MENU button, then re-enter the channel number.
(Setting with the UP/DOWN buttons or PHASE
knob is possible.)
OTHER MONITOR: Copy data from another
monitor. ÷[C151]
MEMORY CARD: Copy data from a memory card.
÷[C152]
[C151] OTHER MONITOR menu (xxCH)
Enter the address number of the source monitor.
MONITOR ADDRESS: Enter the address number of
the monitor from which to copy data.
[C152] MEMORY CARD menu (xx CH)
Select the file name.
FILE NAME: Select the file name.