Storage Conditions; Transportation; Completion Of The Device; Safety Rules - Paton StandardMIG-160 Instruction Manual

10. STORAGE REGULATIONS
The source in use should be stored in dry enclosed spaces at a temperature of less than
5 °C. The room must be free of fumes of acids or other chemically active substances.

11. TRANSPORTATION

Packed source can be transported by all means ensuring its safety in compliance with the
rules of transportation established for the relevant type of transport.

12. COMPLETION OF THE DEVICE

1. PATON™ Welding arc power source with mains cable
2. Cable with ABICOR BINZEL™ electrode holder 3m
3. ABICOR BINZEL™ welding cable with ground terminal 3m
4. Pneumatic quick-release connector
5. Operation manual
6. Corrugated box
For StandardMIG-160/200/250 models:
- Rollers for solid wire (0.6-0.8; 1.0-1.2)
For StandardMIG-270-400V models:
- Rollers for solid wire (0.6-0.8; 1.0-1.2)
- Transport wheel set
For StandardMIG-350-400V models:
- Rollers for solid wire (0.8-1.0; 1.2-1.6)
- Rollers for aluminum wire (0.8-1.0)
- Transport wheel set
13. SAFETY INSTRUCTIONS
PATON StandardMIG DC MMA/TIG/MIG/MAG
The welder has been manufactured in accordance with technical
standards and applicable safety regulations. However, in the event
of improper handling there is a risk of
- Injury to the operator or third parties;
- Damage to the machine itself or to the company's material
assets;
- Interference with the efficient flow of work.
OBLIGATIONS OF THE USER: The user undertakes to allow only
those persons to work with the welding equipment who: are
familiar with the basic safety rules, have been trained in the use of
the welding equipment and are qualified. Have familiarised
themselves with the section "Safety Regulations" and the
precautionary guidelines given in this manual.
- 32 -
– 1 pc;
– 1 pc;
– 1 pc;
– 1 pc;
– 1 pc.
– 1 pc;
– 2 set;
– 2 set;
– 1 pc;
– 2 set;
– 1 set;
– 1 pc.