Information On Disposal Of Used Equipment - Paton StandardMIG-160 Instruction Manual

In addition, the main warranty obligations do not apply to damaged external components
of the device exposed to physical contact and accessories; complaints regarding the
following issues are accepted no later than two weeks after the sale:
- On/Off button on the device;
- knobs for adjusting welding parameters;
- connectors for connecting welding cables;
- control connectors;
- mains cable and mains cable plug;
- carrying handle, shoulder strap, carrying case, case;
- electrode holder, ground clamp, torch, welding cables and hoses.
The distributor reserves the right to refuse warranty repairs or to set the month and year of
manufacture of the device as the date of commencement of warranty obligations
(determined by the serial number):
- in case the owner loses the purchase document;
- in case that the distributor fails to properly or in any way fill out the sales
certificate when selling the device.

15. INFORMATION ON DISPOSAL OF USED EQUIPMENT

The symbol shown on the products means that the device
cannot be disposed of in the same way as household waste.
The device must be handed over to an electrical equipment
disposal point, where it will be accepted free of charge.
Information about such collection points for used
equipment can be found, for example, on websites.
Proper disposal in accordance with Directive 2012/19/EU
(WEEE) Waste Electrical and Electronic Equipment will
preserve valuable
environmental contamination. Failure to comply with the
above recommendations may result in a fine in accordance
with applicable regulations
If you wish to recycle the device, please contact your nearest retailer or contact the
importer of the equipment, who will provide additional information.
IMPORTER / AUTHORIZED DISTRIBUTOR
PATON StandardMIG DC MMA/TIG/MIG/MAG
natural resources and avoid
- 38 -