Aaeon UP Xtreme i11 Getting Started Manual page 6

Hide thumbs Also See for UP Xtreme i11:

Table of Contents

WARNING:

NOT

plug a regular USB cable into the target and attempt to use DCI. Specialty

cables, with VBUS snipped, are required; using a regular USB cable may possibly fry

your target, or worse.

For the v0000 boards, the main source to purchase the DCI Type-A/C cable is

www.designintools.intel.com. Accessing this site requires a confidential NDA with Intel.

This target has its Type-C port enabled for DCI. If you have a debug host with a Type-A

port, purchase the part # ITPDCIAMCM1MU (1.0 meter) cable. The longer 1.8-meter

ITPDCIAMCM2MU will work as well. If your host has a Type-C port, purchase the

ITPDCIC2CD2U1M. Using Type-A/C hubs have been seen to work, but are not

warranted. Type A/C adapters have been seen not to work.

Other vendor sources may have the Type-A/C or Type-C/C DCI cables available. Feel

free to check with supplier options.

For the v0001 boards, purchase the DCI Type-A/A cable. The good news is that, in

addition to www.designintools.intel.com, these cables can be purchased from DataPro:

https://www.datapro.net/products/usb-3-0-super-speed-a-a-debugging-cable.html.

SourcePoint Getting Started Guide – UP Xtreme i11

Table of Contents