DbCStatus.exe: Red is Bad, Green and Yellow are Good
Luckily, there is a convenient application in the SourcePoint install directory that will tell
you that the DCI driver is successfully installed on your computer, and it is possible to
make a connection between SourcePoint and the target.
Navigate to C:\Program Files (x86)\Arium\SourcePoint 7.12.XX (where
XX is your current SourcePoint release), and launch the DbCStatus.exe. You should
see the red ball, indicating that there is no connection:
For the v0000 board, ensure that the Type-C cable is firmly connected to both the host
and target, power up the UP Xtreme i11. In a moment the ball should turn green:
Let the platform boot to the UEFI shell. Congratulations! You have a working DCI
connection. It's smooth sailing from here.
Power Tip: If you are using SourcePoint WinDbg for debugging this board, and have
Windows already installed, there may be situations where you want to go to BIOS setup
©2023 ASSET InterTech, Inc.
9
SourcePoint Getting Started Guide – UP Xtreme i11