Siemens US2:9810T24V User Manual page 171

Display
NOTE: Your display may appear differently than those shown, depending on your meter's power
system and display and localization settings.
Example: Setting volts mode and PT/CT ratios
Use the display navigation icons to set your meter's volts mode and PT ratios.
NOTE: Potential transformers (PT) are also known as voltage transformers (VT).
1. Press to display the menu. Press
the Setup Menu. The Setup Menu lists the setup selections on your meter.
2. Press
press
3. Press
screen is displayed.
4. Press
Press
configuration screen is displayed.
171
or to highlight the different setup menu selections. Highlight Meter Setup and
to select the meter setup screens. The Volts Mode setup screen is displayed.
to highlight Volts Mode. Press
to change the value of the highlighted digit (0 - 9). Press
to enter your password using the onscreen keyboard. The Volts Mode
until Setup Menu is highlighted. Press
to edit the volts mode. The Enter Password
9810 series - User manual
to display
to go to the next digit.
7EN05-0390-08