SUN2000-(8K, 10K)-LC0 Series
User Manual
Requirements for Installing the Signal Cable Connector Block
When you install a connector block in the inverter, align the top of the connector
block with the outer edge of the COM port, as shown in the following figure.
Figure 5-17 Installing the connector block
5.7.1 Connecting RS485 Communications Cables (Inverter
Cascading)
Procedure
Step 1 Connect the signal cable to the signal cable connector block.
Issue 01 (2023-09-15)
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Electrical Connections
57