SUN2000-(8K, 10K)-LC0 Series
User Manual
4.2.3 Angle Requirements
The inverter can be wall-mounted or support-mounted. The installation angle
requirements are as follows:
●
●
Figure 4-5 Installation angle
4.3 Tools
Type
Instal
lation
tools
Issue 01 (2023-09-15)
Install the inverter vertically or at a maximum back tilt of 15 degrees to
facilitate heat dissipation.
Do not install the inverter at forward tilted, excessive backward tilted, side
tilted, horizontal, or upside down positions.
Tool
Hammer drill
Drill bit: Ф8
mm, Ф6 mm
Copyright © Huawei Digital Power Technologies Co., Ltd.
Flat-head
Phillips
insulated torque
insulated torque
screwdriver
screwdriver
4 Installation
Hex insulated
torque
screwdriver
27