Huawei SUN2000-8K-LC0 Series User Manual page 24

SUN2000-(8K, 10K)-LC0 Series
User Manual
Supported Power Grid Types
The SUN2000 supports the following power grid types: TN-S, TN-C, TN-C-S, and
TT. In the TT power grid, the N-to-PE voltage must be less than 30 V.
Figure 2-5 Power grid types
Issue 01 (2023-09-15)
NO TE
● indicates a power cable,
communication.
● Inverters cannot be cascaded in the SmartGuard networking.
NO TE
● The voltage of different maximum power point tracking (MPPT) circuits must be the
same.
● The MPPT voltage must be greater than the lower threshold of the full-load MPPT
range specified in 9 Technical
causing the system yield loss.
Copyright © Huawei Digital Power Technologies Co., Ltd.
indicates a signal cable, and
Specifications. Otherwise, the inverter will be derated,
2 Overview
indicates wireless
17