Advertisement
Quick Links
Quick User Guide
Maytronics Dolphin Cordless Robotic Pool Cleaner
Settings or status indicator
Power button
Extra filter pannels
First Time Use
1
Plug the charger
into the wall outlet
5
Unplug the
inductive charger
|
What's in the Box
Filter basket
Grab hook
2
Connect the inductive
charger to the robot
6
Press the power
button
Inductive charger connection
Clicker
3
Peel-off the sticker
7
Put the robot in the pool.
It will start cleaning within
30 seconds
EN - LIBERTY Quick User Guide | 1
Battery indicators
Charger
4
Charge the battery
to 100% - 3 green bars
Advertisement
Related Manuals for Maytronics Dolphin LIBERTY 400
Summary of Contents for Maytronics Dolphin LIBERTY 400
- Page 1 Quick User Guide Maytronics Dolphin Cordless Robotic Pool Cleaner What’s in the Box Settings or status indicator Battery indicators Power button Inductive charger connection Extra filter pannels Filter basket Grab hook Clicker Charger First Time Use Plug the charger Connect the inductive...
- Page 2 Quick User Guide Features and Indications Cycle Selector Use Cycle Selector to customize cleaning mode to “Floor only”: 1. Press ON to activate until the LED lights up. 2. Press ON again for 3-6 seconds until the purple LED blinks 3 times. Place the robot in the pool, and within 30 sec, it will start working.
- Page 3 Quick User Guide Removing the robot from the pool Grab hook - Pull robot to waterline, then grab it with your hand to pull it out of the water. * Standard pole, not included ClickUp After the cleaning cycle, shake the Clicker inside the water for over 3 seconds and the robot will climb its nearest wall.
- Page 4 Charger protection: IP 54 • Chlorine - 4 ppm, Max. • pH - 7.0-7.8 • NaCl - 5000 ppm, Max. • Battery Lithium-ion | 5,000mAh Scan for User Manual For more information www.maytronics.com.au EN - LIBERTY Quick User Guide | 4...