Off Season Storage - Maytronics Dolphin Liberty 200 User Instructions

10. ROBOTIC POOL CLEANER - TROUBLESHOOTING
Symptom Possible reason
The Robotic Pool • An object is stuck in the tracks or wheels.
Cleaner does NOT
• The robot is not charged
move.
The robotic pool • Clogged filter basket.
cleaner is moving
• Debris stuck in the impeller housing or
in circles.
impeller cover.
• The pool's surface is too glossy for this
robot model.
• Algae buildup or pool water does not
meet specifications.
The robotic pool • Debris stuck in the impeller housing or
cleaner does not impeller cover.
turn or moves in
one direction only.
The Robotic Pool • Clogged filter basket.
Cleaner moves but
• Debris stuck in the impeller housing or
does not clean the
impeller cover.
pool.
The robotic pool • The filter is too full to allow proper jet
cleaner does not propulsion up the wall.
climb up the walls.
Debris is stuck in the impeller housing.
• The pool surface is too slippery.
• Algae on walls.
• Unsuitable pH level.
11. OFF-SEASON STORAGE
Before off-season storage - we recommend charging the battery to about 50% (2 green bars in the
battery indicator panel).
Recommended storage temperature range: -10°C - 40°C / 14°F - 104°F.
Storing the robot in a hot location will likely damage the battery.
After off-season storage, charge the robot to its fullest.
10
Corrective action
• Carefully remove the object from tracks or wheels.
• Charge the battery to 100% -3 green bars
• Contact Customer Care
• Clean the filter basket.
• Contact Customer Care
• Correct pool and water conditions.
• Contact Customer Care
• Clean the filter basket.
• Contact Customer Care
• Clean the filter and make sure that there is nothing stuck in
the impeller.
• Check the level of chemicals in the water. Improper levels may
allow the growth of algae, making the walls slippery.
If so, adjust the levels and scrub the walls.
• Contact Customer Care
Robotic Pool Cleaner LIBERTY
| User Instructions