Hans Grohe Tango C 04270 0 Series Installation Instructions / Warranty page 4

English
Installation
Install the mounting nut, metal washer, and fiber washer
on the valve.
Push the valve up through the mounting surface (1).
Install the stop ring and mounting ring (2). The stop ring
will stop the mounting ring at the proper position.
Rest the valve on the mounting surface.
Tighten the mounting nut by hand (1).
Tighten the tensioning screws using a screwdriver (2).
Place the spout deco ring and spout on the mounting
surface.
Install the mounting flange.
Tighten the mounting collar.

1
1
2
2