Table of Contents
Advertisement
1
Introduction
Rear Panel I/O
Internal I/O
Energy Efficient
Design
Damage Free
Intelligence
Temperature
Humidity
PCB
10
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 1 DB-9 serial port
• 1 HDMI port
• 1 DB-15 VGA port
• 1 DVI-I port (DVI-D signal only)
• 2 RJ45 LAN ports
• 4 USB 2.0/1.1 ports
• Mic-in, line-in and line-out
• 2 connectors for 4 additional external USB 2.0/1.1 ports
• 1 connector for an external serial port
• 1 front audio connector for line-out and mic-in jacks
• 1 S/PDIF-out connector
• 4 Serial ATA connectors
• 1 20-pin ATX power connector
• 1 4-pin 12V power connector
• 1 front panel connector
• 1 chassis intrusion connector
• 2 fan connectors
• ACPI specification 2.0 compliant power management
schemes
• Supports S1 and S3
• Wake-On-Events include:
- Wake-On-PS/2 KB/Mouse
- Wake-On-USB KB/Mouse
- Wake-On-LAN
- Wake-On-Ring
- RTC timer to power-on the system
• AC power failure recovery
- Depending on the type of power supply used, when us-
ing the "AC power failure recovery" feature to power the
system back on after an AC power failure occurs, the
system may not power back on if the power lost is re-
sumed within 2 seconds.
• Monitors CPU/system temperature
• Monitors CPU/DIMM/3.3V/5V/12V/V3sb/1.2V/Vbat voltages
• Monitors CPU/system fan speed
• Read back capability that displays temperature, voltage
and fan speed
• 0
C to 60
C
o
o
• 10% to 90%
• Mini-ITX form factor
• 17cm (6.7") x 17cm (6.7")
Advertisement
Table of Contents
