DFI AR100-DR User Manual page 48

3
BIOS Setup
Head
This field displays the number of read/write heads.
Precomp
This field displays the number of cylinders at which to change the write tim-
ing.
Landing Zone
This field displays the number of cylinders specified as the landing zone for
the read/write heads.
Sector
This field displays the number sectors per track.
Halt On
This field determines whether the system will stop if an error is detected during
power up. The default setting is All Errors.
No Errors
The system boot will not stop for any errors detected.
All Errors
The system boot will stop whenever the BIOS detects a non-fatal error.
All, But Keyboard
The system boot will not stop for a keyboard error; it will stop for all other
errors.
All, But Diskette
The system boot will not stop for a disk error; it will stop for all other errors.
All, But Disk/Key
The system boot will not stop for a disk or keyboard error; it will stop for all
other errors.
Base Memory
Displays the amount of base (or conventional) memory installed in the system.
The value of the base memory is typically 512K for systems with 512K memory
installed on the motherboard or 640K for systems with 640K or more memory
installed on the motherboard.
48