Midi; General; Firmware; Madi User Bit Chart - RME Audio M-32 AD User Manual

15.5 MIDI

• 16 channels MIDI
• 5-pin DIN jacks
• Optocoupled, ground-free input
MADI
• Invisible transmission via User bit of channel 56 (48k frame)

15.6 General

• Dimensions including rack ears (WxHxD): 483 x 88 x 242 mm (19" x 3.46" x 9.5")
• Dimensions without rack ears/handles (WxHxD): 436 x 88 x 235 mm (17.2" x 3.46" x 9.3")
• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
• Relative humidity: < 75%, non condensing
M-32 AD
• Power supply: Internal switching PSU, 100 - 240 V AC, 40 Watt
• Typical power consumption: 23 Watt
• Max. power consumption: < 30 Watt
• Weight: 3 kg ( 6.6 lbs)
M-16 AD
• Power supply: Internal switching PSU, 100 - 240 V AC, 40 Watt
• Typical power consumption: 15 Watt
• Max. power consumption: < 20 Watt
• Weight: 2.5 kg ( 5.5 lbs)

15.7 Firmware

The M-Series is internally based on programmable logic. By re-programming of a little compo-
nent called Flash-PROM, both function and behaviour of the unit can be changed at any time.
At the time of writing this manual, M-32 AD and M-16 AD are shipped with firmware 1.5. The
firmware version is displayed after power on for about one second on the level meters of the M-
series units.
Firmware 1.5: Initial release
Firmware 2.1: ADAT Copy mode for M-16 AD (in Single Speed operation the M-16 AD mirrors
the output signal, so all 4 ADAT outputs are used). The temperature inside the unit can be read
via MIDI. The fan operation can be changed via MIDI.

15.8 MADI User Bit Chart

• RS-232: channels 1 to 9 (passed-through by the M-series)
• ADC: channel 19
• MIDI: channel 56 (48k) / 28 (96k)
User's Guide M-32 AD © RME
32