Table of Contents
Advertisement
3.6. Channel Labels with Integrated Metering
The use of customized channel labels helps in recurring and permanent installations. They inform the
user where the analog connections terminate.
The M-32 DA Pro features 32 fields on the front panel, one for each analog output. Integrated backlight
in shades of green, yellow, and red represents the current level for each channel.
3.7. Meter Backlight Color and Intensity Reference
The following table describes the signal level represented by the backlight color. Each value
corresponds to full scale, which is equivalent to the reference level of the corresponding output.
Color
3.8. Replacing the Channel Labels
No tools are required to replace the channel labels. All 32 labels are printed or written onto a single
sheet.
Perform the following steps to replace the labels:
1. On the left side of the cover, place your fingertip into the recess and gently pull the cover towards
you.
RME M-32 DA Pro User's Guide
Color name
Green
Yellow
Orange
Red
Red flashing fast
Red flashing slow
dBFS
-54 (barely visible in low light)
-40 (barely visible in daylight)
-20 (bright green)
-5 (strong yellow)
-4
-1
0 (at least three consecutive samples)
output muted
3.6. Channel Labels with Integrated Metering | 8
Advertisement
Table of Contents
