Rack Mounting The Ups Or The Delta External Battery Pack (Optional) - Delta M-1K User Manual

3.2 Rack Mounting the UPS or the Delta External
Battery Pack (Optional)
You can rack-mount the UPS and the Delta external battery pack (only
applicable for 3kVA model) in four-post frames. The UPS and the Delta
external battery pack use identical mounting kits and their mounting
procedures are the same.
NOTE :
1. The UPS draws cooling air from its front. If your rack has a door on the
front, make sure that there is sufficient clearance between the UPS vents
and the rack door.
2. It is strongly recommended that at least two people lift the unit for rack-
mounting. If there is only one person available, we suggest that the UPS's
internal batteries should be taken out (less weight) before rack-mounting.
After rack-mounting, reinstall the internal batteries.
3. Only use the provided bracket ears and rail kits to perform rack-mounting.
NEVER depend on lower devices to support other devices.
Rack-mounting procedures
z
z
Attach the included bracket ears to the lateral mounting holes of the UPS.
1
See Figure 3-1.
Adjust the length of the provided rails according to your rack and tighten
2
the nuts. See Figure 3-2.
Amplon M Series
(Figure 3-1 : Mount the Bracket Ears)
2 0