Table of Contents
Advertisement
Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi® AP.
This Quick Start Guide is designed to guide you through
installation and includes warranty terms.
Package Contents
UniFi AP AC Lite
Flat Head Screws
(M3x50, Qty. 4)
Gigabit PoE* (24V, 0.5A)
with Mounting Bracket
* Only the single-pack of the UAP-AC-LITE includes a PoE adapter and
power cord.
Installation Requirements
• CAT5/6 cable
• Phillips screwdriver
• Drill and drill bit (6 mm for wall-mounting or 3 mm for
ceiling-mounting)
• Optional: Drywall or keyhole saw (to cut 18 mm hole for
Ethernet cable feed)
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer's
responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
Mounting Bracket
Keps Nuts
(M3, Qty. 4)
Power Cord*
Ceiling Backing Plate
Screws
(M2.9x20, Qty. 4)
Quick Start Guide
Screw Anchors
(M3x20, Qty. 4)
802.11ac Dual Radio
Access Point
Model: UAP-AC-LITE
Advertisement
Table of Contents
