Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the UAP-AC-M- PRO and the other at the entry point to the building.
Page 3
4/15/2021 UAP-AC-M-PRO Quick Start Guide The UAP-AC-M-PRO supports wireless adoption into your UniFi Wi-Fi network. This UAP-AC-M-PRO Quick Start Guide feature requires a currently managed UniFi AP operating with the following configuration: The UniFi AP must be running firmware 3.7.7 or newer At least one SSID enabled and operating on 5 GHz band The UAP-AC-M-PRO must be within wireless range of the UniFi AP Hardware Overview...
LAN and DHCP server. Power can be provided by one of the following: Gigabit PoE Adapter (included) Ubiquiti UniFi Switch with PoE 802.3af/802.3at PoE+ compliant switch Hardware Installation The UAP-AC-M-PRO can be mounted on a pole or mast, or on a wall. Perform the steps for the appropriate installation.
Page 7
4/15/2021 UAP-AC-M-PRO Quick Start Guide UAP-AC-M-PRO Quick Start Guide Wall Mount Note: Secure the Mounting Bracket directly to a stud or other structurally stable surface using appropriate fasteners. https://dl.ubnt.com/qsg/UAP-AC-M-PRO/UAP-AC-M-PRO_EN.html 7/20...
4/15/2021 UAP-AC-M-PRO Quick Start Guide UAP-AC-M-PRO Quick Start Guide Optional Wireless Adoption “Wireless Adoption Requirements” before proceeding. 1. Ensure the UAP-AC-M-PRO is powered on, and then launch the UniFi Controller software. 2. Go to the Devices page, and the UAP-AC-M-PRO will show up as Pending Approval (Wireless).
Controller software, refer to the User Guide. Mobile App Installation Ubiquiti also offers the UniFi app, which is available from the App Store® (iOS) or Google Play™ Store (Android). You can use it to provision a UniFi AP for basic functionality without configuring a UniFi Controller.
4/15/2021 UAP-AC-M-PRO Quick Start Guide 3. This equipment is provided with a detachable power cord which has an integral safety ground UAP-AC-M-PRO Quick Start Guide wire intended for connection to a grounded safety outlet. a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
Page 18
4/15/2021 UAP-AC-M-PRO Quick Start Guide This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject UAP-AC-M-PRO Quick Start Guide to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
4/15/2021 UAP-AC-M-PRO Quick Start Guide UAP-AC-M-PRO Quick Start Guide Brazil Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it.