Package Contents - Ubiquiti UAP-AC-HD Quick Start Manual

Introduction
Thank you for purchasing the Ubiquiti Networks®
UniFi® 802.11ac Wave 2 Enterprise Wi-Fi Access Point.
This Quick Start Guide is designed to guide you through
installation and includes warranty terms.
IMPORTANT:
Controller v5.4 or higher, available at:
www.ubnt.com/download/unifi

Package Contents

UniFi AP AC HD
Keps T-Bar
Nuts Mounts
(Qty. 4) (Qty. 2)
Release Tool
* Included only in the single-pack of the UAP-AC-HD
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
designed for outdoor installations. It is the professional installer's responsibility to follow local
country regulations, including operation within legal frequency channels, output power, and
Dynamic Frequency Selection (DFS) requirements.
The UAP-AC-HD requires the UniFi
Mounting
Plate
T-Bar
Screws
(Qty. 2)
Cable Feed Plug
Ceiling Backing
Plate
Allen
Wrench
(Qty. 4)
Gigabit PoE*
(48V, 0.5A) with
Mount Bracket
Ceiling Screws
(Qty. 4)
Wall Screw
Screws Anchors
(Qty. 4)
Power Cord*
™ is