Assembling the Extra Wide Table
e
t
w
r
q
y
Peel off the backing paper from the rubber soles and
attach to the bottom of the legs.
q Rubber sole
w Leg
Attach the 6 legs to the table top with the setscrews.
e Setscrew
r Table top
Remove the extension table.
Place the assembled table on the machine as shown so
the table catches the pin on the backside of the free arm.
t Pin
Adjust the height of the table top by turning the adjusting
screw.
y Adjusting screw
Using the Cloth Guide
q
Remove the extension table and attach the extra wide
table.
Attach the cloth guide to the free arm by pushing the
q
cloth guide down to snap it in place.
Slide the cloth guide to the desired position.
Place the fabric with its edge against the cloth guide and
sew.
q Cloth guide
w Free arm
w
36