Planet Networking & Communication XGS-6320 Series User Manual page 418

Layer 3 10 gigabit managed ethernet switch
Table of Contents

Advertisement

 Rev
 TxAps
 WTR
 HoldOff
 Enable
 Oper
 Warning
 Configuration Buttons
Buttons
: Click to refresh the page immediately.
When checked, the port recovery mode is revertive, that is, traffic switches back
to the working port after the condition(s) causing a switch has cleared. In the
case of clearing a command (e.g. forced switch), this happens immediately. In
the case of clearing of a defect, this generally happens after the expiry of the
WTR (Wait-To-Restore) timer.
When unchecked, the port recovery mode is non-revertive and traffic is allowed
to remain on the protect port after a switch reason has cleared.
Choose whether this end transmits APS PDUs. Only used for 1+1, unidirectional.
When Rev is checked, WTR (Wait-To-Restore) tells how many seconds to wait
before restoring to the working port after a fault condition has cleared. Valid
range 1 - 720
When a new (or more severe) defect occurs, the hold-off timer will be started and
the event will be reported after the timer expires. HoldOff time is measured in
milliseconds, and valid values are in the range 0 - 10000. Default is 0, which
means immediate reporting of the defect.
The administrative state of this APS instance. Check to make it function normally
and uncheck to make it cease functioning.
This field can not be configured, but shows the operational state. You can click
on the link in the APS # field to get more details on the status.
APS instance is functional.
APS instance is not functional.
If the operational state is Active, the APS instance is indeed active, but it may be
that it doesn't run as the administrator thinks, because of configuration errors,
which are reflected in the warnings below.
The Warning information is indicated by
Use the tooltip to get the detailed warning information.
You can modify each APS in the table using the following buttons:
: Edits the APS row.
: Deletes the APS.
: Adds new APS.
418
User's Manual of XGS-6320 Managed Switches
: no warning,
: warning.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xgs-6320-12x4trXgs-6320-8up4xXgs-6320-8x8tr

Table of Contents