Shutdown
State
Counter
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the page; any changes made locally will be undone.
: Click to clear the counters.
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
■
Disabled: Port shut down is disabled.
■
The default value is "Disabled".
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the
■
ACL user module.
Disabled: To close ports by changing the volatile port configuration of the
■
ACL user module.
The default value is "Enabled".
Counts the number of frames that match this ACE.
393
User's Manual of XGS-6320 Managed Switches