Ipv6 Routing Info. Base - Planet Networking & Communication XGS-6320 Series User Manual

4.4.4 IPv6 Routing Info. Base

This is IPv6 route entry table. It is used to provide the route entries status information. The screen in
The page includes the following fields:
Object
Protocol
Network/Prefix
NextHop
Distance
Metric
Interface
Uptime (hh:ss:mm)
State
Buttons
: Click to refresh the page
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Updates the table entries, starting from the first available entry. If the first entry of the table is displayed, the button
is disabled.
Updates the table entries, ending at the last available entry. If the last entry of the table is displayed, the button is
disabled..
Figure 4-4-4: IP Status Page Screenshot
Description
The protocol of the route.
DHCP: The route is created by DHCP.
Connected: The destination network is connected directly.
Static: The route is created by user.
OSPF: The route is created by OSPF.
Network and prefix (example 10.0.0.0/16) of the given route entry.
The IP address of nexthop. Value '0.0.0.0' indicates the link is directly connected.
The distance of the route.
The metric of the route.
The interface where the ip packet is outgoing.
The time till the route is created. The unit is second.
Indicate if the destination network is reachable or not.
User's Manual of XGS-6320 Managed Switches
263
Figure 4-4-4 appears.