Planet Networking & Communication XGS-6320 Series User Manual page 307

 Invalid Timer
 Garbage Collection
Timer
 Static Redistribute
Mode
 Static Redistribute
Metric Value
 Connected
Redistribute Mode
 Connected
Redistribute Metric
Value
 OSPF Redistribute
Mode
 OSPF Redistribute
Metric Value
The invalid timer is the number of seconds after which a route will be marked
invalid.The allowed range is 5 to 2147483.
The garbage collection timer is the number of seconds after which a route will be
deleted.The allowed range is 5 to 2147483.
Indicate if the router redistribute the static routes intothe RIP domain or not.
Enable: Enable static routes redistribution.
Disable: Enable static routes redistribution.
User specified metric value for the static routes. The field is significant only when
the argument 'StaticRedistIsSpecificMetric' is TRUE. If the specific metric setting
is removed while the static redistributed mode is enabled, the router will updates
the original static redistributed routes with metric value 16 before updates to the
new metric value
The allowed range is 1 to 16.
Auto: The redistributed metric value is refer to redistributed default metric value.
Specific: User specified metric for the static routes.
Indicate if the router redistribute the directly connected routes with RIP not
enabled into the RIP domain or not.
Enable: Enable connected routes redistribution.
Disable: Enable connected routes redistribution.
User specified metric value for the connected interfaces. The field is significant
only when the argument 'ConnectedRedistIsSpecificMetric' is TRUE. If the
specific metric setting is removed while the connected redistributed mode is
enabled, the router will updates the original connected redistributed routes with
metric value 16 before updates to the new metric value.
The allowed range is 1 to 16.
Auto: The redistributed metric value is refer to redistributed default metric value.
Specific: User specified metric for the connected routes.
Indicate if the router redistribute the OSPF routes into the RIP domain or not. The
field is significant only when the OSPF protocol is supported on the device.
Enable: Enable OSPF routes redistribution.
Disable: Enable OSPF routes redistribution.
User specified metric value for the RIP routes. The field is significant only when
the OSPF protocol is supported on the device and argument
'OspfRedistIsSpecificMetric' is TRUE. If the specific metric setting is removed
while the OSPF redistributed mode is enabled, the router will updates the original
OSPF redistributed routes with metric value 16 before updates to the new metric
value
The allowed range is 1 to 16.
Auto: The redistributed metric value is refer to redistributed default metric value.
Specific: User specified metric for the OSPF routes.
307
User's Manual of XGS-6320 Managed Switches