Planet Networking & Communication XGS-6320 Series User Manual page 420

 State, Warning
 State, Protection
 Defect state, Working,
Protection
 TxAps, RxAps -
Request
If the operational state is Active, the APS instance is indeed active, but it may be
that it doesn't run as the administrator thinks, because of configuration errors,
which are reflected in the warnings below.
The Warning information is indicated by
Use the tooltip to get the detailed warning information.
The possible protection group states. The letters refers to the state as described
in G.8031 Annex
No request Working: A.
No request Protecting: B.
Lockout: C.
Forced Switch: D.
Signal fail Working: E.
Signal fail Protecting: F.
Manual switch to Protecting: G.
Manual switch to Working: H.
Wait to restore: I.
Do not revert: J.
Exercise Working: K.
Exercise Protecting: L.
Reverse request Working: M.
Reverse request Protecting: N.
Signal degrade Working: P.
Signal degrade Protecting: Q.
The possible values of this field are shown below:
ok: The port defect state is OK
sd: The port defect state is Signal Degrade
sf: The port defect state is Signal Fail
The possible transmitted or received APS request according to G.8031, Table
11-1.
nr: No Request.
dnr: Do Not Revert.
rr: Reverse Request.
exer: Exercise.
wtr: Wait-To-Restore.
ms: Manual Switch.
sd: Signal Degrade.
sfW: Signal Fail for Working.
fs: Forced Switch.
sfP: Signal Fail for Protect.
lo: Lockout.
420
User's Manual of XGS-6320 Managed Switches
: no warning, : warning.