Planet Networking & Communication XGS-6320 Series User Manual page 387

The table contains one row per static or sticky MAC address.
Object
 Delete
 Port
 VLAN ID & MAC
Address
 Type
Buttons
sticky MAC address to a particular interface. Once satisfied, click the Save-button to save the changes to running-config.
Notice that sticky entries are normally added automatically through learning on the interface.
: Click to refresh the page. Note that non-committed changes will be lost.
Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Description
Press this button to remove the entry from the MAC address table (if present)
and the running-config.
Notice that dynamic entries may be removed all-together on an interface through
"Monitor→Security→Port Security→Switch" and one-by-one through
"Monitor→Security→Port Security→Port"
The port number to which this MAC address is bound.
The VLAN ID and MAC address in question.
Indicates the type of entry and may be either Static or Sticky (see description
above).
: Clicking this button will add a new row to the table. This new row allows for adding a static or
User's Manual of XGS-6320 Managed Switches
387