User's Custom Settings - Life Fitness 5500HR Assembly Instructions Manual

5
U ' C
SER S USTOM
5.1 U ' C
SER S USTOM
User's Custom Settings allow changing some of the Cross-Trainer operational settings. Through these Settings, various operational
parameters can be changed.
The User's Custom Settings and their associated default settings are listed below.
MAXIMUM WORKOUT DURATION:
To access User's Custom Settings, exit any program so the Message Center displays "PRESS ENTER TO BEGIN." Instead of pressing Enter
for a program, press the Up arrow key. "USER'S CUSTOM SETTINGS" will appear.
While in the User's Custom Settings, press Enter to scroll forward through each Setting option, or to exit after the last Setting. Alternately, press
the Clear key to scroll backward through the Settings, or to exit at the start. Upon exiting, the Message Center is momentarily blank and then
displays "PRESS ENTER TO BEGIN."
The User's Custom Settings are described below.
S
ETTINGS AND
S
ETTINGS
Configuration Setting
SLEEP MODE DELAY:
PAUSE TIMEOUT DURATION:
TELEMETRY (ON/OFF):
ENGLISH/METRIC UNITS:
STATISTICS:
S T
YSTEM EST
Factory Default
CT 5500HR
OFF Number of minutes before sleep mode begins.
Can be disabled or adjusted from 1-255 minutes.
1 minute Number of minutes user can pause a workout.
Can be adjusted from 1-99 minutes.
ON Telemetry allows the product to use the Polar
Training exercise chest strap to monitor the heart rate.
ENGLISH The units of measure used by the equipment
(e.g. miles or kilometers).
60 minutes The maximum duration of a workout.
Can be adjusted from 60 to 99 minutes
- Displays statistics on hours of use and programs used.
Description
®
Heart Rate Zone
17