Parrot Uncle BBCF590 Owner's Manual page 25

13. Light Kit LED Driver Replacement
13.6
Slide the Ceiling Cover and the Coupler Cover up and
off the Downrod to access the top of the Motor Housing
(Figure 47).
13.7
Remove the Hairpin Clip from the Clevis Pin.
Remove the Clevis Pin from the Motor Coupler to release
the Downrod from the Motor Coupler (Figure 48).
Retain both the Clevis Pin and the Hairpin Clip for future
reinstallation.
13.8
Remove the two Set Screws, using a Phillips Head
Screwdriver, from the Motor Coupler (Figure 48).
Retain both Set Screws for future reinstallation.
Remove the Downrod from the Motor Coupler and
retain for future reinstallation.
13.9
Remove the six Upper Motor Cover Screws, using a
Phillips Head Screwdriver (Figure 49).
Slide the Upper Motor Cover up and off the downrod to
expose access to the Light Kit Driver.
Retain the six Screws and Motor Cover for future
reinstallation.
Figure 47
CLEVIS
PIN
REMOVE
REMOVE
PHILLIPS HEAD
PHILLIPS HEAD
SET SCREWS (2)
SETSCREWS (2)
Figure 48
REMOVE UPPER
MOTOR COVER
SCREWS (6)
UPPER
MOTOR COVER
Figure 49
25
(Continued)
CEILING
COVER
DOWNROD
COUPLER
COUPLING
COVER
COVER
FAN MOTOR
HOUSING
MOTOR
MOTOR
COUPLER
COUPLING
HAIRPIN
CLIP