Parrot Uncle BBCF590 Owner's Manual page 17

7. How to Wire Your Ceiling Fan
7.6
Securely connect the Receiver Blue Wire (TO LIGHT)
to the Fan Motor Blue Wire using the Wire Connector
(supplied in parts bag) (Figure 29).
7.7
While inserting the Receiver fully into the Hanger
Bracket, turn Wires upward and carefully push Wires
into the Outlet Box, with the White and Green Wires on
one side of the Outlet Box and position the Black Wire
on the other side of the Outlet Box (Figure 30).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
7.8
Screw the two Threaded Studs (supplied in parts
bag) into the Tapped Holes in the Hanger Bracket
(Figure 31).
FAN MOTOR BLUE WIRE
Figure 29
Figure 30
Figure 31
17
(Continued)
RECEIVER
BLUE WIRE
(TO LIGHT)
OUTLET BOX
RECEIVER
HANGER BRACKET
HANGER BRACKET
THREADED STUDS (2)