Light Kit Assembly - Parrot Uncle BBCF590 Owner's Manual

NOTE: If installing Ceiling Fan without the Light Kit
Assembly, Skip to Section 6. Optional Installation of
No-Light Plate Assembly, Step 6.4.
5.1
Engage the Fan Motor 2-Pin Wire Connector into the
2-Pin Wire Connector of the Light Kit Assembly
(Figure 16).
The connection is complete when you hear a soft click.
5.2
Remove one of the three 6-32 x 3/8" Truss Head
Screws with Lockwashers in the Light Kit Adapter and
loosen the remaining two Screws (Figure 17). Retain
the Screw and Lockwasher for future use.
Carefully tuck all the Wires into the Light Kit Adapter
prior to installing the Light Kit Assembly (Figure 17).
Position the Light Kit Assembly Key Hole Slots onto
the two loosened 6-32 x 3/8" Pan Head Screws with
Lockwashers.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the Light Kit Assembly and the Light Kit
Adapter.

5. Light Kit Assembly

11
FAN MOTOR
ASSEMBLY
2-PIN CONNECTOR
LIGHT KIT ASSEMBLY
2-PIN CONNECTOR
Figure 16
LOOSEN THE TWO 6-32 x 3/8" TRUSS HEAD
SCREWS WITH LOCKWASHERS
REMOVE ONE 6-32 x 3/8" TRUSS HEAD
Figure 17
SCREW WITH LOCKWASHER
H
LIGHT KIT
ADAPTER
LIGHT KIT
ASSEMBLY