Parrot Uncle BBCF590 Owner's Manual page 21

11.2
The Remote Control is designed to separately control
your Ceiling Fan Speed and Light Intensity (Figure 38).
There are Four Push Buttons ( . , .. , ... , .... ) to set the
Fan Speed.
11.3
The Light Push Button (
OFF and controls the Light Intensity (Figure 38).
To vary the Intensity of the Light, hold the Light Button
( ) down until the desired Light Intensity is reached,
then release the Button (Figure 38).
NOTE: When turning the light on, light will turn on
at the light intensity previously selected.
Your Remote Control has full control of your Fan and
Light.
The Power Indicator Light (blue glow) will Illuminate
while any Button is pressed, indicating that the Battery
is good.
) turns the Light ON and
POWER INDICATOR
LIGHT
LIGHT BUTTON
Figure 38
Figure 39
COVER
WALL
BRACKET
SCREWS (2)
Figure 40
21
HIGH TO LOW
BUTTONS
TO INSTALL BRACKET
TO WALL:
INSTALL THE TWO SCREWS
SLIDE THE COVER DOWN