Lockly ACCESS TOUCH PRO User Manual page 12

3.1 Adding a Fingerprint
Make sure fingers and sensor are clean and free of dirt, oil, water, sweat, or
any other moisture or foreign material. Sensor can be cleaned by wiping
with a lint-free microfiber cloth.
1
On the Lockly AMZ app, select the Lockly Access Touch Pro
1
you wish to add a fingerprint. Go to Access > Access
Management > Access > Fingerprint.
2
Select the finger you wish to register and tap "Start."
3 Scan your selected finger until you hear a beep indicating
your fingerprint has been successfully registered.
SECTION 3.1
(Continued)
2 3
Continued...
10