Table of Contents
Advertisement
4.3 Rain Mode
To protect the lock and extend battery life, Lockly Access Touch Pro automatically
enters. Rain Mode whenever rain or water is detected on the fingerprint sensor
for more than 45 seconds. When Rain Mode is activated, the fingerprint sensor
will not respond. The lock automatically exits rain mode every 30 minutes and
only reenters if rain or water is still detected. See below for ways to access during
Rain Mode.
ACCESS DURING RAIN MODE
When RAIN MODE is ON, the fingerprint sensor cannot be used. You can only
pass the Unlock physical key.
NOTE: When the lock enters Rain Mode, it's recorded in the log history on
the Lockly AMZ app. The app will also send a push notification to your mobile
phone letting you know that the lock is in Rain Mode.
17
RAIN MODE ACTIVATED
Fingerprint sensor disabled
SECTION 4.3
Advertisement
Table of Contents
Need help?
Do you have a question about the ACCESS TOUCH PRO and is the answer not in the manual?
Questions and answers