steadily for another 5 seconds, after which it returns
to display the time of the current lap, updating the
number of laps. When the 60th lap is reached, the
message "Full" is displayed and it is not possible to
record new times: in this case, delete the saved laps
in order to record new ones.
Use the "Lap" function in the "Setting" menu (page
218) to:
Activate or deactivate the function
●
View the recorded lap data
●
Delete recorded data
●
To close the window, press and hold button (1) for a
long time. The window can be closed keeping the
function active.
The instrument panel stops recording the lap by
resetting the stopwatch in the following cases:
If bike speed is equal to 0 after 5 seconds from
●
first lap start.
If bike speed drops below 5 km/h (3 mph) for
●
more than 5 seconds during lap recording.
If the engine is turned off.
●
The following data is recorded for each lap:
Time
●
Maximum reached speed
●
Maximum reached RPM
●
Maximum reached lean angle
●
Maximum reached yaw angle.
●
Note
The stopwatch can be started only when the
motorcycle speed is higher than 5 km/h (3 mph).
Note
If during lap recording the flash button (4) is
pressed to start/stop the stopwatch, any further
button presses occurred within 5 seconds will not be
considered by the instrument panel.
149