Alphanumeric Display; Answer A Call; Auto Answer; Basic Call - Vertical IP2007 User Manual

4-4
Chapter 4 - Phone Features

Alphanumeric Display

The IP2007 Phone extension provides a graphic LCD that supports 64 alphanumeric
characters. The LCD display is also used to provide a user interface to assist with
configuration of the IP2007.

Answer a Call

There are various ways to answer an incoming call:
Lift the handset to answer the call.
Press the SPEAKER button to answer the call in handsfree mode.
Press HEADSET button to answer the call in headset mode.

Auto Answer

You can use the Auto Answer function to automatically answer all incoming calls when
you are busy. You can enable or disable this function through the LCD menus or via the
Web. The default value is "Disabled".
Phone & Web Access
» Phone Menu = Left soft key to CONFIG >
options
» Web Menu = Login > Phone tab > Phone Parameters

Basic Call

To make an intercom call ... dial a Station number (IP Terminal, SLT) or a Voice Mail
number.
To make an outgoing call ... dial a phone number. The system chooses a PSTN line or IP
trunk via the Call Routing Table to dial out. If it includes * in the phone number, and the
call is dialed through PSTN Trunk, the * will be interpreted as a one second pause.
-or-
Dial a PSTN, an IP Trunk or a Trunk Group number first. After hearing a dial tone, dial the
phone number.
Xcelerator IP Administrator Manual
Alphanumeric Display
key > key to 8. Auto Answer >
Enable Auto Answer
for
March 2007