Table of Contents
Advertisement
Installation Manual
4. Electrical Information:
Voltage Type:
What is the total amperage of the
panel to which the charger is con-
nected?
Is this panel dedicated just to your
Ford EV chargers?
Max Current Switch Setting, if appli-
cable (if your charger has a hard-
ware dip-switch, what is the current
setting?)
Electrical Information Specifics – circle in the table below or fill out in the last
column the breaker size, amp output rating, wire size for L1 and L2, wire size for
ground (GND), and wire coating.
Recommendations, need to comply with local AHJ. Choose or specify for each
row.
Breaker Size:
Amp Output
Rating
Wire Size (L1 & L2):
Wire Size (GND):
Wire Material:
Wire Coating:
Have all the wires been installed with the torque
specified in this manual?
Voltage Reading (L1 to GND): write in
Voltage Reading (L2 to GND): write in
Voltage Reading (L1 to L2): write in
Was an external energy / load management system
installed?
240V split-
phase
100
80
60
80
64
48
#2
#4
#6
#8
#8
#8
THHN, THWN-2, XHHW-2
31
80A Charging Station Series 2
208V three-
phase
Yes
No
50
40
40
32
#6
#8
#8
#10
Copper
Yes
Yes
240V three-
phase delta
Other
30
20
Specify:
_____
24
16
Specify:
_____
#8
#10
Specify:
_____
#10
#12
Specify:
_____
Copper
Specify:
_____
No
No
Advertisement
Table of Contents
