LifeSpan Contour Studio Commercial Pilates Reformer Bed Set User Manual page 12

BOX SET UP

1. Place the box on the carriage vertically or horizontally under the shoulder pads for your preferred

exercise.

STORING THE REFORMER UPRIGHT

FIG 1

WARNING: You need a height of 2.5m for your ceiling

1. Remove the Risers and Rope from the Reformer.

2. Move the foot bar to the angle as shown in Fig 1.

3. Lifting from the Riser end of the Reformer tilt it until it is on the vertical position and resting on

the wheels and foot bar (Fig 2).

MOVING THE REFORMER

1. Ensure to remove the Foot strap from the frame so it is not in the way of the wheels.

2. Hold the Reformer frame from the Riser side and tilt it onto the wheels of the other end. You can now

move to your desired location.

| ASSEMBLY INSTRUCTIONS

FIG 2

Table of Contents