Appendix C - Inspection Checklists - Snorkel 460SJ Operator's Manual

Prestart Inspection Checklist
Item
Operator's Manual
Engine
Oil level
Coolant
Radiator
Fuel tank and line
Electrical System
Batteries
Battery fluid level and terminals
Cables and wiring harness
Hydraulic System
Fluid level
Hoses, tubes, and fittings
Cold weather warm-up
Tires
Foam filled
Wheels
Lower Control Station
Operating controls
Emergency stop and emergency power
Emergency Lowering
Level Sensor
Flashing Light
Structures
Weldments –
Chassis, turntable, booms, platform, etc.
Slide pads
Fasteners
Upper Control Station
Guardrail system and fall protection anchors
Panel carrier
Operating controls –
Emergency stop and emergency power
Horn
Snorkel Guard
Electrical power outlet – GFCI
Level Sensor
Machines manufactured before April 2021
Machines manufactured after March 2021
Drive Motion Alarm
Sandblast Protection Kit
Air Line to Platform
Drive and Working Lights
Tow Kit
Platform Glazier Package
Platform Welder/Generator
Placards and Decals
Performed by:
Model Number:
460SJ – 1433685
Appendix C – Inspection Checklists
Boom functions, drive, brakes, etc.
Maintenance Table Key: P = Pass, F = Fail, R = Repaired
Inspect For
In place, all pages readable and intact
Between full and add marks
Proper fluid level
Cap tight, good condition and clean
Tank full, cap in place and tight/no leaks
Condition and charged for proper operation
Proper level/clean, connectors tight
No wear or physical damage
Between full and add marks
No leaks
Proper operation
Good condition
All wheel lug nuts present and properly torqued
Proper operation
Shuts off lower controls/proper operation
Proper operation
Sounds tilt alarm
Proper operation
Welds intact, no damage or deformation
In place, no damage or deformation
In place and tight
Welds intact, no damage or deformation
No damage or deformation of cradles and hook
Proper operation/drive motion alarm sounds
Shuts off upper controls/proper operation
Sounds when activated
Proper operation
Proper operation
Sounds tilt alarm
Unstowed disables boom/drive, alarm/tilt light on
Sounds when machines is driven
In place and proper operation
No damage or deformation, caps in place
No damage or deformation, proper operation
In place, n
o damage or deformation
No damage or deformation of trays, pins, and straps
No damage or deformation, proper operation
In place and readable
Serial Number:
Date:
P/F/R