Appendix C - Inspection Checklists - Snorkel S2255RT Operator's Manual

Prestart Inspection Checklist
Item
Operator's Manual
Electrical System
Battery terminals
Cables and wiring harness
Hydraulic System
Fluid level
Hoses, tubes and fi ttings
Free-wheeling valve
Tires and Wheels
Lower Control Station
Operating controls
Emergency stop
Lowering alarm
Lowering interrupt – CE/AS/NZS
Emergency Lowering
Safety Prop
Flashing Light – option
Pipe Rack – option
Panel Carrier – option
Snorkel Guard – option
Bumpguard – option
Airline to platform – option
Inverter – option
Structures
Weldments – Chassis/platform/etc.
Rollers and slide blocks
Fasteners
Upper Control Station
Guardrail system
Platform extension/latch handles
Brakes
Operating controls
Emergency stop
Lowering alarm
Drive motion alarm
Battery condition indicator
Horn
Placards and Decals
Performed by:
Model:
S2255RT S2755RT - 15286-1
Appendix C – Inspection Checklists
Inspect For
In manual holder, all pages readable and intact
Clean, connectors tight
No wear or physical damage
Visible on full/add sticker with platform stowed
No leaks, all fi ttings tight
In normal operation position, closed
Good condition
Proper operation
Shuts off lower controls/proper operation
Sounds when platform lowers
Sounds when platform lowers/proper operation
Proper operation
No damage or deformation
Proper operation
No damage or deformation. Proper operation
No damage or deformation. Proper operation
No damage or deformation. Proper operation
No damage or deformation. Proper operation
No damage or deformation. Proper operation
No damage or deformation. Proper operation
Welds intact, no damage or deformation
In place, no damage or deformation
In place, tight, and no damage
Welds intact, no damage or deformation
All fasteners in place, no loose or missing parts
Proper operation, no damage or deformation
Proper operation
Proper operation
Shuts off upper controls
Sounds when platform lowers
Sounds when aerial platform drive function is operated
Proper operation
Sounds when activated
In place and readable
Maintenance Table Key: P = Pass, F = Fail, R = Repaired
Serial Number:
P
Date:
F R