Snorkel 460SJ Operator's Manual page 77

Symptom
Electrical outlet does not work.
Hydraulic fluid temperature 200°F
(93°C) or more.
Severe hydraulic leak.
460SJ – 1433685
Possible Cause
Power supply not plugged in.
AC generator switch not in the gener-
ator position.
Power cord to platform is not plugged
into the AC generator.
Prolonged boom operation or driving.
High pressure fluid return to reservoir
caused by kinked or twisted hose.
Hydraulic system component failure.
Failure of hose, tube, fitting, seal, etc.
Chapter 11 – Troubleshooting
Corrective Action
Plug a source of power into the pow-
er-input connector on the turntable.
With the engine running, place the
AC generator switch in the generator
position.
Plug power cord into the outlet on the
generator.
Stop operation until fluid cools.
Remove the kink or twist from the hose.
Let fluid cool before operating.
Stow the machine and do not operate
until repairs are made.
Do not operate machine until repairs
are made.
69