Snorkel 460SJ Operator's Manual page 24

Chapter 3 – Safety
Verify that all placards and decals are in place and legible
before using the machine.
Never use a machine that is damaged, not functioning
properly, or has damaged or missing placards and decals.
To bypass any safety equipment is prohibited and pres-
ents a danger for the persons on the aerial work platform
and in its working range.
Never charge batteries near sparks or open flame.
Charging batteries emit explosive hydrogen gas.
Modifications to the aerial work platform are prohibited or
permissible only at the approval by Snorkel.
After use, secure the work platform from unauthorized use
by turning the keyswitch off and removing key.
Driving MEWP's on public highways is subject to national
traffic regulations.
16
Certain inherent risks remain in the operation of this
machine despite utilizing proper design practices and
safeguarding.
Fall protection anchors are provided in the platform and
the manufacturer recommends the usage of a fall restraint
or fall arrest device as required by national or local reg-
ulations and standards.
Care must be taken to ensure that the machines meets
the requirements of stability during use, transportation,
assembly, dismantling when out of service, testing, or
foreseeable breakdowns.
In the event of an accident or breakdown see Chapter
10 – Emergency Operation. Do not operate the aerial plat-
form if it is damaged or not functioning properly. Qualified
maintenance personnel must correct the problem before
putting the aerial platform back into service.
460SJ – 1433685