Table of Contents
Advertisement
Motion detector top unit Standard
￭
Press the push-button cover at the top or bottom or the push-button for longer
than 0.4 seconds. Light becomes brighter or dimmer as far as the respective
limit value.
Push-button: The dimming direction is changed with each new long actuation.
Saving the switch-on brightness
Only in combination with a main device with a dimming insert.
In the state as supplied, the switch-on brightness is set to maximum brightness.
￭
Set light to the required brightness.
￭
Press the push-button cover over entire surface for longer than 4 seconds.
Switch-on brightness is saved. For confirmation, the light is switched off briefly
and switched on again.
An push-button cannot be used to save the switch-on brightness.
Deleting the switch-on brightness
Only in combination with a main device with a dimming insert.
￭
Press the push-button cover briefly: Light switches on at the saved switch-on
brightness.
￭
Press the push-button cover over entire surface for longer than 4 seconds.
The switch-on brightness is deleted. On switching on, the dimming insert
switches to the last set brightness value. For confirmation, the light is switched
off briefly and switched on again.
A push-button cannot be used to delete the switch-on brightness.
4
Information for electrically skilled persons
DANGER!
Electric shock when live parts are touched.
Electric shocks can be fatal.
Always disconnect before carrying out work on the device or load. For this, switch off
all the corresponding circuit breakers, secure against being switched on again, and
check that there is no voltage. Cover up adjacent live parts.
32599612
10870634
19.07.2023
5 / 14
Advertisement
Table of Contents
